Gallery (4)
MessReg CTS Trolley
Electronic digital measuring Track gauge and cant values are recorded automatically every 5 mm Time and cost saving Up to 10 different parameters are recorded in one single measurement Real-Time-Monitoring Measuring values and exceeding are always displayed Lightweight and smart design Only one person needed for build-up and operation Suitable to any type of switches Switches and crossings can be passed through from both directions without objectives Comprehensive software package - MessProfi, the tried-and-tested software offers an advanced management of all track data, including switch data editor, reporting, maintenance history and others - CDMviewer, a powerful software tool for graphic analyses and reporting of the measuring data - CDMcatcher, data capture programme for displaying, evaluation and saving with switch inspections - CDMline, data capture programme for displaying and saving with track measurements All track gauge and cant measurements are carried out automatically The measurement values are assigned automatically to the defined measuring points in accordance with the recorded distance travelled. Apart from the starting point, no other measurement point needs to be confirmed manually. The starting point and the direction of measurement can be selected as required In order to make the measuring process as flexible as possible, you can choose the measuring direction yourself. Customized remarks can be entered while measuring The user can enter any comment or note at any time during the measuring process. Each comment is automatically assigned to the travelled distance and will become part of the measuring report, too. Main track and diverted track can be measured independently Switch measurements are divided up into main and diverted track. Different interfaces for sharing / reporting of measuring data In general all measuring data can be exported to Excel. Additionally other interfaces for commercial or customized software (i.e. Access, SAP) are available upon request.
RM 1200 digital
Measuring method The carriage is moved from the start to the end stop of the 1200 mm measuring distance by a hand-crank. A touch probe records the geometry of the rail surface at 2 mm intervals. The measured rail profile is compared against the profile of a reference rail. Any differences detected are recorded digitally depending on travel and saved to the MiniPad. Wherever rails are welded, ground and milled, the results have to be assessed for quality control purposes: a job for the RM 1200digital.The approved and handy measuring system is immediately ready for use, while the measurement is done in just a few seconds. New The latest generation of the proven RM 1200digital is equipped with an outdoor tablet, the MiniPad. In addition to a high-resolution 7" colour display and convenient touch screen operation in a familiar Windows environment, the MiniPad offers a decisive advantage: the data evaluation according to standard EN 13231-3:2012 or German DB RIL 824 can be performed on the measuring device. Practical The measured data are shown as a chart in real time and then stored on the MiniPad. The measurement files can be evaluated there immediately, or they can be exported for further processing in another program (default interfaces available: USB, WiFi, Bluetooth). Helpful Extra functions such as the integrated digital camera or the text editor used to record important rail data, enable measurements to be documented in an optimal way.
digital switch gauge and cant measuring device RCAD
Measuring devices of Vogel & Plötscher are used to set standards within track and rail business. With the digital switch gauge and cant measuring device RCAD this is once again demonstrated successfully. Due to the advantages of digital technology the operation of the measuring gauge is simplified and an even higher level of accuracy and safety is offered, too. But there are some more convincing benefits while using the digital way of measurement: RCAD shows all measured values on a clear LCD-display. That means all data are easily seen at a glance and reading errors or inaccuracies are avoided by thus. Only the knob for setting the gauge remains to be used. The illuminated display supports measurements done in gloaming or even darkness. RCAD: handy, precise, digital The weight of the measuring device is about 2,5 kg. It is insulated and approved by Deutsche Bahn (DB). Power supply is done by commercial 2 x 1.5 V batteries. Measuring parameters and ranges Alternative: RCAD-BT As an option RCAD can be equipped with a flash memory including bluetooth transmitter. Thus the displayed values can be easily stored at the push off a button. Afterwards the data are transferred via Bluetooth to the computer for customized processing (i.e. as Excel file).
MessReg PTP II
MessReg PTP II Digital electronic measuring system for optimum precision Measurement in accordance with valid international standards High-performance removable MPCe measurement computer (incl. colour display, touch-screen function, date/time display function) Direct measurement of all relevant switch dimensions (track gauge, flangeway clearance, check rail gauge, back-to-back distance, cant) Automatic storage of cant values at all track measurement points Automatic evaluation of dimensions derived from measurement points (twist, differences in track gauge between adjacent measurement points) Dynamic tolerance monitoring and display (up to 5 evaluation criteria for each measurement point) User-defined text entry (comments) possible for each measurement point Correct ascertainment and evaluation of new test values: – free wheel passage – frog groove depth – passage gauge – free wheel clearance Features MPCe display and control unit Software Multifunctional measurement computer with a colour display (320 x 240 pixels), specially developed for outdoor use on tracks – even in wet conditions and in darkness. An integrated SD storage card acts as a data carrier whilst power is provided by a high-performance lithiumpolymer battery. The MPCe's operating software manages measurement tasks and automatically evaluates measurement values. Helpful additional functions such as time/date management, real-time display, virtual keyboard and Bluetooth (optional) round off the scope of performance. Another plus point is the fact that the MPCe can be used separately from the measuring device, for example for visual track inspections. Together with the optional checklist software, the material and geometric condition of track systems can be ascertained and evaluated quickly and efficiently. Modern switch gauge with digital measuring device and electronic inclination sensor for precise measurements. The DBM-2 is available for a range of track gauges and with a variety of optional extras. DBM-2 digital base measuring device
Locations
Branch 5.32 km
Locations
Branch 5.32 km
Reviews
No Reviews
Reviews
No Reviews
Team
Information not available